raspberry pi BLE test
pi@raspberrypi:~ $ hciconfig 
hci0:   Type: Primary  Bus: UART 
        BD Address: DC:A6:32:1B:77:A1  ACL MTU: 1021:8  SCO MTU: 64:1 
        UP RUNNING PSCAN 
        RX bytes:262620421 acl:446292 sco:0 events:558 errors:0 
        TX bytes:11747 acl:305 sco:0 commands:148 errors:0
pi@raspberrypi:~ $ sudo hciconfig hci0 up
pi@raspberrypi:~ $ hcitool dev 
Devices: 
        hci0    DC:A6:32:1B:77:A1 
pi@raspberrypi:~ $ hcitool lescan 
Set scan parameters failed: Operation not permitted
pi@raspberrypi:~ $ sudo hcitool lescan 
LE Scan ... 
7D:1B:0B:6A:05:63 (unknown) 
7D:1B:0B:6A:05:63 (unknown) 
6A:E7:D6:09:08:99 (unknown) 
49:FD:47:DE:FF:B1 (unknown) 
49:FD:47:DE:FF:B1 (unknown) 
EC:55:4A:7C:64:8F (unknown) 
44:23:7C:32:A0:0F (unknown) 
44:23:7C:32:A0:0F (unknown) 
04:CF:8C:24:88:1D (unknown) 
04:CF:8C:24:88:1D Qingping Bluetooth Gateway 
E0:1F:64:B1:49:0B (unknown) 
E0:1F:64:B1:49:0B Amazfit Bip Watch 
50:EC:50:8B:E3:B8 (unknown) 
50:EC:50:8B:E3:B8 Qingping Bluetooth Gateway 
2E:08:6B:35:2A:28 (unknown) 
4E:ED:0B:FF:93:97 (unknown) 
5A:16:D6:9E:41:39 (unknown)
65:43:57:FC:2C:34 Lio
pi@raspberrypi:~ $ sudo hcitool leinfo 65:43:57:FC:2C:34
Requesting information ... 
Could not create connection: Input/output error
pi@raspberrypi:~ $ sudo hcitool leinfo 65:43:57:FC:2C:34
Requesting information ... 
Could not create connection: Input/output error
pi@raspberrypi:~ $ gatttool -I -b 65:43:57:FC:2C:34 
[65:43:57:FC:2C:34][LE]> connect 
Attempting to connect to 65:43:57:FC:2C:34 
[65:43:57:FC:2C:34][LE]>
'Embeded' 카테고리의 다른 글
| Raspberry pi 에서 BLE 띄우기 (0) | 2020.12.03 | 
|---|---|
| raspberry pi bluetooth a2dp sink 동작하기 (0) | 2020.11.20 | 
| sound card driver 에서 amp 소리날 때만 켜기 (0) | 2020.08.12 | 

